Using and maintaining the paper shredder
Posted: Wed Feb 12, 2025 10:23 am
2.1 Shredder standard
Requirements for shredders vary by industry. According to DIN 66399, there are 7 levels of secrecy for shredders. Level 7 is the highest level of secrecy. The status of shredded paper according to specific criteria is as follows.
If a high level of confidentiality is required, a P-7 level shredder can be selected. However, the price of a level 7 shredder is also high.
2.2 Bandwidth
The throughput of a shredder refers to the thickness of the paper and the maximum number of sheets that the shredder can process at one time. The amount of shredded paper is the throughput of the machine itself. A normal shredder can shred 13-15 sheets at a time, while a large shredder can shred 60-70 sheets at a time. Generally, the bangladesh number data better the shredding effect, the worse the shredding ability. For example, the rated throughput of a shredder of one brand is A4 70g 7-9 sheets, which means that the shredder can process seven to nine sheets of A4 paper with a thickness of 70g at one time. For general office use, 3-4 sheets of A4 70g are enough to meet daily needs. If it is a large office, a shredder with a suitable format and higher speed should be selected. The existing large shredders can shred up to 60-70 sheets at a time.
The shredder must be used within its capacity to avoid paper jams, motor overload and other problems.
2.3 Shredder Entry Width
Because the area of the computer file is wider than that of the ordinary office file, usually 9*11 or 11*15, the shredded paper must be inserted vertically with a cut, otherwise the entire line of text may remain intact and the data will be revealed; If the hole is too thin, the paper will fold together, reducing the number of shredded pieces at a time, and this may cause paper jam, reducing the work efficiency. Therefore, when using a special computer shredder, its entrance should be at least 385 mm wide, this is the minimum standard.
Requirements for shredders vary by industry. According to DIN 66399, there are 7 levels of secrecy for shredders. Level 7 is the highest level of secrecy. The status of shredded paper according to specific criteria is as follows.
If a high level of confidentiality is required, a P-7 level shredder can be selected. However, the price of a level 7 shredder is also high.
2.2 Bandwidth
The throughput of a shredder refers to the thickness of the paper and the maximum number of sheets that the shredder can process at one time. The amount of shredded paper is the throughput of the machine itself. A normal shredder can shred 13-15 sheets at a time, while a large shredder can shred 60-70 sheets at a time. Generally, the bangladesh number data better the shredding effect, the worse the shredding ability. For example, the rated throughput of a shredder of one brand is A4 70g 7-9 sheets, which means that the shredder can process seven to nine sheets of A4 paper with a thickness of 70g at one time. For general office use, 3-4 sheets of A4 70g are enough to meet daily needs. If it is a large office, a shredder with a suitable format and higher speed should be selected. The existing large shredders can shred up to 60-70 sheets at a time.
The shredder must be used within its capacity to avoid paper jams, motor overload and other problems.
2.3 Shredder Entry Width
Because the area of the computer file is wider than that of the ordinary office file, usually 9*11 or 11*15, the shredded paper must be inserted vertically with a cut, otherwise the entire line of text may remain intact and the data will be revealed; If the hole is too thin, the paper will fold together, reducing the number of shredded pieces at a time, and this may cause paper jam, reducing the work efficiency. Therefore, when using a special computer shredder, its entrance should be at least 385 mm wide, this is the minimum standard.