It is checked with a multimeter, usually located on the heating element or on the tank. If it is a thermistor, then it will definitely be stuck in the heating element, and the resistance of the Indesit washing machine temperature sensor is approximately 22 kOhm at room temperature. It is checked quite simply, we put the multimeter probes on the sensor contacts, hold it in our hand and look at the resistance, if it changes, then the sensor is working properly.
Thermistors burn out very rarely, in my entire practice there were no more than three or four cases, but thermostats fail more often. You can check the thermostat using the same multimeter, it should ring, and when the canada telegram data temperature rises, the circuit should break. If this sensor fails, the error code F03 is displayed on the control panel, this code may also indicate that the heating element relay on the control module is faulty.
The drum of the Indesit washing machine does not spin . First of all, you need to check the brushes on the motor, usually when the motor fails, the control module displays the error code F02. You also need to check if the belt has come off, it often happens that the belt breaks, and there can be 2 reasons why this happens: the belt is worn out or the bearings have flown apart.
The next reason for this trouble is a faulty pressure switch (water level sensor), if the pressure switch does not generate a signal that the tank has filled with water, then the control module may not give a signal to connect the motor to the washing process. In case of a malfunction of the pressure switch, the error code is written as F04 or F05
The Indesit washing machine does not heat water . In old Indesit machines, everything was extremely clear: if it does not heat, then the heating element is to blame.
The water heating temperature sensor has failed
-
- Posts: 233
- Joined: Thu Jan 02, 2025 8:24 am